Before installing a home AC wallbox: a practical planning guide

Bring the right questions to your installer: daily energy needs, supply capacity, cable routing, shared parking and a clear handover.

Published
INOCHARGE cabled AC charger

A home wallbox project starts with the vehicle, the electrical supply and the parking space. Having a convenient wall does not establish that the supply is ready. Arrange a site assessment by a qualified electrical professional before choosing an installation arrangement or assuming the charger’s highest power setting will be available.

Describe the job the charger needs to do

Tell the installer how far you normally drive and how long the car stays at home. Replacing a day’s driving energy can be a more useful design question than charging an empty battery as quickly as possible. For illustration, 50 km of driving at an assumed 18 kWh/100 km uses about 9 kWh in the vehicle. Charging losses mean the supply must provide more. These are example inputs, not consumption figures for a particular car.

Bring the vehicle’s documented AC limit and usable battery capacity. Mention a possible second EV if it is relevant to future planning. You do not need to buy every future capability immediately, but the installer should understand what changes may be needed later.

Ask for a supply assessment, not just a mounting quote

Available capacity depends on more than a spare position in the distribution board. The assessment should consider the incoming supply, phase arrangement and simultaneous household loads. Cable routing, earthing, protective devices and the manufacturer’s installation instructions also matter.

Useful questions for the survey include:

  • What charging power is appropriate with other household loads operating?
  • What changes are needed to the supply or distribution board?
  • How will the dedicated circuit be routed and protected?
  • How will residual-current and overcurrent protection be selected for this equipment and installation?
  • Which measurements and functional checks will be documented at handover?

Do not select cable sizes or protective devices from a generic online example. Route length, installation method and local rules change the design. A stated built-in 30 mA residual-current protection function does not by itself establish that all circuit protection or DC fault-current measures are present. The installer must check the documented protection features together with the earthing arrangement. Those decisions belong to the qualified professional responsible for the work.

Walk through the parking routine

Park the car in its normal position and identify the charging inlet. Consider whether the car sometimes faces the other way. The cable needs a route that avoids tension, door edges and pedestrian movement, plus a suitable resting place for the connector. An outdoor position also needs assessment for water accumulation, impact and environmental exposure.

The current INOCHARGE cabled charger includes a 5 m attached vehicle cable. Check that length against the real route, not simply the distance across an empty parking space. With the socketed model, include storage for the separate compatible cable in the plan.

The current INOCHARGE datasheet describes a three-phase supply. Its 7 kW setting corresponds to approximately 10 A per phase at 400 V line-to-line; it is not proof that the unit is suitable for a single-phase home. Have the exact product and intended connection confirmed before proceeding.

Shared buildings add practical decisions

In an apartment building, agree the use of the parking space, permission for routes through shared areas and responsibility for electricity costs. Establish which meter supplies the charger. Permission requirements depend on the building and jurisdiction; a general article cannot establish approval for a particular property.

If app or network features are part of your plan, check connectivity at the actual parking point. A home router that works indoors may not provide a useful connection in the garage. Wi-Fi or Ethernet planning is separate from electrical capacity, and network access does not increase the power available to the vehicle.

Leave with an understandable handover

Ask the installer to explain the configured power limit, completed tests and normal operating procedure. You should know how to start and end a session, disconnect correctly and recognise when support is needed. Keep the applicable product instructions and installation records accessible. If app accounts or RFID access have been configured, confirm who controls them.

For general background, AFDC’s home-charging guidance discusses installation planning, while Electrical Safety First emphasises competent installation. Their country-specific rules are not substitutes for the regulations and professional assessment applicable to your property.

To plan cable reach and storage in the parking space, use the tethered versus socketed wallbox comparison.

Source links and technical information last checked: 17 November 2026.